Introduction

INTRODUCTION

Components for a Typical System

Lightprojector

Available with a wide range of lamps from halogen to metal halide, most with options that include colour wheels, sparkle wheels, colour synchronisation and DMX control. Precise optical systems ensure that output is maintained even after lamp changes.

Fibre

Glass or PMMA depending on the application. Fiberstars fibre, both BPAK Lateral and FSPT end lit, are PMMA and benefit from the lower transmission losses of acrylic fibre. Glass harnesses must be pre-assembled at our factory whilst PMMA can be pre-assembled or configured on site.

Fittings

Lensed heads, adjustable or fixed. We can design and manufacture special fixtures for applications where specific problems need to be solved.

Mounting Accessories

Mainly used with Fiberstars Lateral fibre, a variety of fixing tracks and clips ensure that Spiral Stairs

the fibre stays in position. We can also supply fixings for under-water use and special applications.

Fibre Optic Applications

Throughout this catalogue you will find a wide range of installation photographs that show most of the common applications. With almost no heat or ultra violet and no electrical power at the task. Fibre optic systems can provide safe, economical and low maintenance lighting. Applications include:

Cabinet/Museum Lighting

Remote siting of the Lightprojectors allows easy lamp changes whilst providing effective illumination for a wide variety of objects.

Conservation issues can be addressed to meet the most stringent requirements, particularly the reduction and elimination of heat and UV in small cabinets.

Side Lit Fibre Illumination/Water Features

Fiberstars Lateral fibre provides a unique method for outlining the edges of buildings Electric Palms

and for delineating step edges and water features.

Lateral (or side lit fibre) can be combined with underwater spots to produce interesting colour change effects in swimming pools and decorative water features.

Decorative/Sparkle Ceilings

Up to 2500 points can be run from one central Lightprojector. Synchronisation can link the colour change of Lightprojectors so that all colours in the installation change at the same time. DMX control allows colour selection/synchronisation or strobe effects on individual Lightprojectors. Please contact the Crescent Sales Office for more specific information.

	INTRODUCTION
	Components for a Typical System Lightprojector Available with a wide range of lamps from halogen to metal halide, most with options that include colour wheels, sparkle wheels, colour synchronisation and DMX control. Precise optical systems ensure that output is maintained even after lamp changes. Fibre Glass or PMMA depending on the application. Fiberstars fibre, both BPAK Lateral and FSPT end lit, are PMMA and benefit from the lower transmission losses of acrylic fibre. Glass harnesses must be pre-assembled at our factory whilst PMMA can be pre-assembled or configured on site. Fittings Lensed heads, adjustable or fixed. We can design and manufacture special fixtures for applications where specific problems need to be solved. Mounting Accessories Mainly used with Fiberstars Lateral fibre, a variety of fixing tracks and clips ensure that the fibre stays in position. We can also supply fixings for under-water use and special applications.		Fibre Optic Applications Throughout this catalogue you will find a wide range of installation photographs that show most of the common applications. With almost no heat or ultra violet and no electrical power at the task. Fibre optic systems can provide safe, economical and low maintenance lighting. Applications include: Cabinet/Museum Lighting Remote siting of the Lightprojectors allows easy lamp changes whilst providing effective illumination for a wide variety of objects. Conservation issues can be addressed to meet the most stringent requirements, particularly the reduction and elimination of heat and UV in small cabinets. Side Lit Fibre Illumination/Water Features Fiberstars Lateral fibre provides a unique method for outlining the edges of buildings and for delineating step edges and water features. Lateral (or side lit fibre) can be combined with underwater spots to produce interesting colour change effects in swimming pools and decorative water features. Decorative/Sparkle Ceilings Up to 2500 points can be run from one central Lightprojector. Synchronisation can link the colour change of Lightprojectors so that all colours in the installation change at the same time. DMX control allows colour selection/synchronisation or strobe effects on individual Lightprojectors. Please contact the Crescent Sales Office for more specific information.